.jpg)
Core Cutting Saw Blades are used for core cutting applications in the mineral and mining exploration industry to give a more detailed analysis of various rock formations.
Read more
The core trays have been designed to stack three wide on a standard pallet (1165 mm wide) which means maximum volume when transporting. The design also includes strapping slots to minimize the movement of samples during transportation and also leads to better protection of the core during travel and storage.
Read more
The clay is added to a Water Based Mud system to achieve various effects including viscosity control, shale stability, enhance drilling rate of penetration, cooling and lubricating of equipment.
Read more
Activated-sludge method normally can be used to process urban and industrial sewage water, biochemistry mud is normally colloid with strong hydrophilicity, has high organic content, and is difficult to dewater. The product has small dosage, excellent effect and low cost, the effect is better when it is matched with organic flocculation agent particularly
Read more
The core lifter assembly includes three key parts that allow you to firmly grip the core sample so that it can be broken and brought to the surface. The correct gap between the core lifter, the core lifter case and the stop ring is essential– using the same supplier for all three parts is strongly recommended and will ensure optimal performance.
Read more
Exploration diamond drilling is used in the mining industry to probe the contents of known ore deposits and potential sites. By withdrawing a small diameter core of rock from the orebody, geologists can analyse the core by chemical assay and conduct petrologic, structural and mineralogicalstudies of the rock.
Read more
ï¬ To provide an inner shoulder where the latches of the inner tube head assembly can lock onto ï¬ To provide an adaptor between the core barrel outer tube and the drill rods ï¬ By means of a tang, to stop the head assembly rotating inside the LC, preventing the latches from premature wear ï¬ To provide varying degrees of stabilization in order to minimize deviation while drilling The first three functions can be classified as technical, while the fourth and most important one is more technological, being related to borehole deviation control.
Read more
 AUTHORIZED SELLER IN THE PHILIPPINES |
PSEC REGISTERED |
ACCREDITED IMPORTER AND TRADER |
Mining & Petroleum Services Corporation (MIPSCOR) focuses on imports and supply of drilling fluids, chemical additives, auxiliary drilling and mining equipment, tools and spare parts to exploration, mining, energy development and construction companies with drilling activities in both urban centers and regional areas of the Philippines.
MIPSCOR is operating as an accredited importer and trader of drilling equipment and drilling supplies to water well contractors, mining and exploration companies.
Our mission is to provide safe, efficient and high-quality tools and equipments to our customers helping them with all their needs.
FMC Mud Pump Kit
The core lifter assembly includes three key parts that allow you to firmly grip the core sample so that it can be broken and brought to the surface. The correct gap between the core lifter, the core lifter case and the stop ring is essential– using the same supplier for all three parts is strongly recommended and will ensure optimal performance.
Stop ring
This ring ensures that the core lifter stays in the core lifter case. It is easily inserted into the grooved space provided in the core lifter case.
Core lifter
The core lifter is one of the most important parts for core recovery. The inside of the lifter comes in two styles, slotted and fluted (also known as broached), to ensure a good grip regardless of the ground conditions. A core lifter that is slotted is good for competent soil whereas a fluted core lifter provides better recovery in fractured ground.
Core lifter case
The core lifter case is essential when it is time to break the core sample. Its tapered interior prevents the core lifter from moving and allows it to keep its grip on the core sample.
Mud Dehydrating Agent:
Activated-sludge method normally can be used to process urban and industrial sewage water, biochemistry mud is normally colloid with strong hydrophilicity, has high organic content, and is difficult to dewater.
Treatment of Sewage Water and Organic Waste Water:
The product shows electropositivity in acid or alkaline media, thereby the product is extremely effective for flocculation, sedimentation and disambiguition of sewage water whose suspended particulates are provided with negative charge such as waste water of alcohol plant, waste water of brewhouse, waste water gourmet powder factory, waste water of sugar making plant, waste water of manufactured meat plant, waste water of beverage factory, waste water of printing & dyeing mill, and the like.
Water treatment flocculation agent of tap water plants with rivers as water sources:
The product has small dosage, excellent effect and low cost, the effect is better when it is matched with organic flocculation agent particularly.
Water-based mud (WBM): Most basic water-based mud systems begin with water, then clays and other chemicals are incorporated into the water to create a homogeneous blend resembling something between chocolate milk and a malt (depending on viscosity). The clay is usually a combination of native clays that are suspended in the fluid while drilling, or specific types of clay that are processed and sold as additives for the WBM system. The most common of these is bentonite, frequently referred to in the oilfield as "gel". Gel likely makes reference to the fact that while the fluid is being pumped, it can be very thin and free-flowing (like chocolate milk), though when pumping is stopped, the static fluid builds a "gel" structure that resists flow. When an adequate pumping force is applied to "break the gel", flow resumes and the fluid returns to its previously free-flowing state. Many other chemicals (e.g. potassium formate) are added to a WBM system to achieve various effects, including: viscosity control, shale stability, enhance drilling rate of penetration, cooling and lubricating of equipment.
The Locking Coupling: A key factor for hole deviation control,
The first three functions can be classified as technical, while the fourth and most important one is more technological, being related to borehole deviation control.
The core trays have been designed to stack three wide on a standard pallet (1165 mm wide) which means maximum volume when transporting. The design also includes strapping slots to minimize the movement of samples during transportation and also leads to better protection of the core during travel and storage.
